ABB 07KT93 Central Processing Unit Overview
When machine cycles demand precise pulse counting and rapid signal capture, the ABB 07KT93 Central Processing Unit delivers. This CPU from ABB’s proven automation line includes a high-speed counter that runs independently of the user program. That independence means the 07KT93 responds to external signals without waiting for scan cycle completion — a practical advantage for time-critical counting and position tasks.
Key Technical Capabilities
The 07KT93 high-speed counter reaches a maximum counting frequency of 10 kHz. It counts 0 to 1 edges at terminal 02, also designated E 62,00. Fast digital signal input into the user program occurs with a delay of less than 0.02 ms at terminal 02 (E 62,00) and terminal 03 (E 62,01).
Counter Control and Monitoring
You enable or disable counting through internal variable A 63,14 in the user program. Setting A 63,14 = 0 lets internal variable A 63,13 control the function: A 63,13 = 1 enables counting, while A 63,13 = 0 disables it. Setting A 63,14 = 1 instead routes control to terminal 03 (E 62,01), where signal 1 enables counting and signal 0 disables it. A 63,13 has no effect in this mode. The dead time may be 0 to 1.5 ms.
To set the counter, use internal variable A 63,15 = 1 to load the value held in internal word variable AW 06,15. If A 63,15 = 1 persists across several processing cycles, the processor sets the counter at program end each time. During the rest of the cycle, the counter continues counting pulses at terminal 02. Read the counter content through internal variable EW 06,15.
A zero-crossing message fires when counter contents change from -1 to 0. It always appears via internal variable E 63,13, and at terminal 36 (A 62,00) only when A 63,14 = 1. Reaction time may be 0 to 1.5 ms. Note that A 63,14 = 1 disables direct control of output A 62,00 from the user program. Setting the counter cancels the zero-crossing message.
Comparison: 07KT93 vs. Standard PLC Counter Modules
| Feature | ABB 07KT93 Integrated Counter | Typical Standard Counter Module |
|---|---|---|
| Counting frequency | 10 kHz max | Often lower |
| Signal input delay | < 0.02 ms | Usually higher |
| Program independence | Yes, runs independently | Varies |
| Zero-crossing message | Via E 63,13 and A 62,00 | Not always available |
Practical Applications
In packaging lines, the 07KT93 counts product pulses at 10 kHz while the main program handles logic — no missed edges. In material handling, the sub-0.02 ms input delay captures fast sensor transitions for accurate position tracking. For OEMs replacing older CPU boards, the integrated counter removes the need for a separate module, saving panel space and wiring time.
Integration and Selection Notes
Confirm your backplane and terminal wiring match the 07KT93 designation before ordering. The internal variable addressing (A 63,14, A 63,15, EW 06,15) must align with your existing program structure. Oil AutoTech provides hands-on technical selection help and fast-dispatch spares for oil, gas and industrial automation applications. Please verify current lifecycle status and availability with Oil AutoTech before ordering.
Contact Oil AutoTech today for pricing and availability.
