What Is the GE IC200CHS003C VersaMax Carrier?
Is a loose terminal block slowing down your panel build or forcing an unplanned line stop? The GE IC200CHS003C answers that problem directly. It is a VersaMax connector-style I/O carrier built to hold one I/O module and route field wiring through a 36-pin connector instead of screw terminals.
GE Fanuc and GE Intelligent Platforms originally developed this carrier; Emerson now owns the line. The single-slot design keeps replacement simple: match the carrier, seat the module, and reconnect the pre-wired plug. For oil, gas, and industrial automation panels, that means less downtime and faster changeovers.
Technical Specifications
| Specification | Value |
|---|---|
| Model | IC200CHS003C |
| Brand / Owner | Emerson (current owner) |
| Original Manufacturer | GE Fanuc / GE Intelligent Platforms |
| Series | VersaMax |
| Connector Style | 36-pin connector |
| Slots | 1 |
| Current per I/O Point | 2 A |
| Power/Ground Current | 8 A |
| Transient Voltage Rating | 300 VAC |
| Mounting | 35 mm DIN rail |
| Dimensions (H×W×D) | 139.7 x 110.5 x 70 mm |
| Weight | Not available |
| Lifecycle | Not available (Last verified: 2026-09) |
What the Key Ratings Mean in Practice
The 2 A per I/O point rating sets the ceiling for the field device you connect through each point. The 8 A power and ground current rating covers the carrier’s shared supply and return paths, so total module load matters as much as any single channel. The 300 VAC transient voltage rating describes the carrier’s ability to withstand short-duration voltage spikes on the backplane side.
Where This Carrier Fits in Real Panels
A 36-pin connector carrier suits skids and packaged equipment where wiring is pre-built and tested away from the panel. In upstream oil and gas, a pre-wired harness lets crews swap a failed I/O module without re-terminating dozens of conductors. In water treatment and pipeline stations, the same approach shortens planned maintenance windows. For OEM machine builders, the DIN rail footprint of 139.7 x 110.5 x 70 mm keeps panel depth predictable across builds.
Installation and Integration Notes
Mount the carrier on 35 mm DIN rail and confirm the rail is clean, straight, and properly grounded before seating anything. Align the module with the single slot and press it fully home so the backplane contacts engage. Route field wiring to the 36-pin connector, keeping high-current and low-level signal conductors separated to reduce noise.
This is a hardware carrier, not a network interface. If your architecture uses fieldbus or industrial Ethernet, the network connection lives on the controller or communications module, not on this part. Confirm your cabling and any gateway needs with the supplier before you order.
Selection Checklist Before You Buy
Verify three things: the module you intend to seat is a VersaMax module, your field wiring matches the 36-pin connector style, and your panel has 35 mm DIN rail space for the 139.7 x 110.5 x 70 mm envelope. Because lifecycle status is not available, please verify current lifecycle status and availability with Oil AutoTech before ordering. The team offers hands-on technical selection help and fast dispatch, worldwide, so you can match the right carrier to your existing rack the first time.
Maintenance and Reliability
Inspect the carrier periodically for loose connectors, corrosion, and dust buildup, especially in hot or humid cabinets. Follow the manufacturer’s safety manual for all service work. Keep spare carriers on the shelf for critical loops; fast, ready-to-ship spares protect production far better than expedited freight after a failure. Contact Oil AutoTech today for pricing and availability.
