Product Overview
Downtime on a process line often traces back to a single I/O point that will not read or drive correctly. The IC200UEX636-C from GE Fanuc / GE Intelligent Platforms, now owned by Emerson, gives maintenance teams a practical way to extend analog signal handling inside a VersaMax system. This analog expansion module carries 4 analog inputs and 2 analog outputs, so a single unit covers both measurement and control loops.
For plants running oil, gas, and industrial automation equipment, keeping a spare on the shelf is a reliability decision. Oil AutoTech supplies ready-to-ship spares when you need them, with fast dispatch and worldwide delivery.
Technical Specifications
| Specification | Value |
|---|---|
| Model | IC200UEX636-C |
| Series | VersaMax |
| Input Channels | 4 analog inputs |
| Output Channels | 2 analog outputs |
| Resolution | 12-bit |
| Input Voltage Range | 0 to 10.23 VDC, +/-10.23 VDC |
| Input Current Range | 0 to 20.47 mA, 4 to 20 mA |
| Power Supply | 100-240 VAC |
| Operating Temperature | 0 to +60°C ambient |
| Storage Temperature | -40 to +85°C |
| Dimensions (H×W×D) | 90 x 76 x 150 mm |
What These Ratings Mean on the Floor
The 12-bit resolution sets the smallest step the module can resolve, which matters when a loop needs fine adjustment rather than coarse on/off behavior. The input voltage range of 0 to 10.23 VDC and +/-10.23 VDC, plus the current range of 0 to 20.47 mA and 4 to 20 mA, covers the common transmitter and signal types found in process control. Two analog outputs let one module drive final elements while still reading field instruments.
The 100-240 VAC power supply suits a wide range of control cabinet feeds, so the same spare works across different plant areas. The 90 x 76 x 150 mm housing fits standard VersaMax mounting arrangements.
Where It Fits in Service
Maintenance engineers value modules that behave predictably in hot cabinets. With an operating temperature of 0 to +60°C ambient, the IC200UEX636-C handles typical panel conditions. In gas metering skids, the 4 analog inputs can collect pressure and flow transmitter signals while the 2 outputs trim a control valve. In water treatment and pump stations, the same channel mix supports level and flow loops without adding separate cards.
Because the module is part of the VersaMax family, it slots into existing racks where analog expansion is needed. If you are replacing a failed unit, match the model and channel count before ordering.
Installation and Setup Notes
Mount the module in the rack according to the system layout, and confirm the cabinet supply matches the 100-240 VAC rating. Keep input wiring separated from high-power conductors to reduce noise on low-level signals. After power-up, verify each channel reads correctly across its configured range before returning the loop to automatic control.
If you need help confirming the right module for your rack, Oil AutoTech offers hands-on technical selection help.
Maintenance and Reliability
Schedule periodic inspection of terminal connections and cabinet cooling. Heat is the main enemy of analog accuracy, so check that ambient temperature stays within 0 to +60°C. Store spare units between -40 to +85°C to protect them before installation. Keeping one spare on hand shortens repair time and protects production.
Please verify current lifecycle status and availability with Oil AutoTech before ordering.
Frequently Asked Questions
How many channels does the IC200UEX636-C provide?
It provides 4 analog inputs and 2 analog outputs, giving both measurement and control in one module.
What input signal ranges are supported?
The module accepts 0 to 10.23 VDC and +/-10.23 VDC, plus 0 to 20.47 mA and 4 to 20 mA.
What power supply does it require?
It operates from a 100-240 VAC supply.
What is the operating temperature range?
The module is rated for 0 to +60°C ambient operation and -40 to +85°C storage.
Can Oil AutoTech help confirm compatibility?
Yes. Contact Oil AutoTech today for pricing and availability, and our team can assist with selection.
