Product Overview
Downtime on a production line rarely waits for a purchase order. When a Modicon Momentum rack needs a fresh output module, the 170BDO94650 from Schneider Electric is the practical answer. This unit is an output module built for the Modicon Momentum series, and it drives 16 output channels on AC voltage from 115 to 230V at 50 or 60 Hz. That combination suits plants running mixed European and North American supply standards without stocking two different module types.
Oil AutoTech supplies this module as a fast-dispatch spare for oil, gas and industrial automation applications, with quick worldwide delivery and hands-on technical selection help if you are unsure about your rack configuration.
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Schneider Electric |
| Product Line | Modicon Momentum |
| Part Number | 170BDO94650 |
| Product Type | Output module |
| Number of Outputs | 16 |
| Voltage Type | AC |
| Voltage Rating | 115-230V AC |
| Frequency | 50/60 Hz |
| Output Group | 1 group |
| Operating Temperature | 0 to 40 degrees Celsius |
| Maximum Operating Altitude | 1000 meters above sea level without derating |
| Maximum Operating Humidity | 80% RH without condensation |
| Maximum Storage Humidity | 80% RH without condensation |
| CE Marked | Yes |
What the Key Ratings Mean in Practice
The 16 outputs sit in a single output group, so the module presents one consolidated switching block rather than several isolated banks. For panel builders this simplifies wiring layout and terminal planning. The 115-230V AC rating means the module can switch loads directly at common industrial control voltages, which removes the need for intermediate relay stages in many cabinets. Running at 50 or 60 Hz keeps the unit usable across regions and legacy installations alike.
Environmental limits are clearly defined: 0 to 40 degrees Celsius operating temperature, up to 1000 meters altitude without derating, and 80% relative humidity without condensation in both operation and storage. These figures matter when you are placing a Momentum rack in a non-climate-controlled electrical room.
Where the 170BDO94650 Fits
Upgrading an Existing Momentum Rack
Plants standardised on Modicon Momentum often keep spare output modules on the shelf because a failed output block can stall an entire process line. The 170BDO94650 slots into that role directly: same series, same 16-channel AC output function, same voltage window. If you are replacing an ageing module and want to confirm the fit before ordering, send your rack details to Oil AutoTech and the team will check compatibility with you.
Oil, Gas and Heavy Process Control
In oil and gas facilities, AC output modules typically drive pumps, valves, fans and indication circuits. A 16-channel module with a 115-230V AC range covers a broad set of those duties. The 80% RH limit and 0 to 40 degrees Celsius window suit sheltered control rooms and many skid-mounted panels, provided condensation is managed.
Panel Building and System Integration
Machine builders using Momentum as a compact I/O platform benefit from the single output group layout, which keeps field wiring straightforward. The CE marking supports use in European installations where compliance documentation is part of the project file.
Installation and Setup Notes
Mount the module in accordance with the Modicon Momentum hardware documentation for your specific base and rack arrangement. Keep the cabinet within the stated 0 to 40 degrees Celsius operating range and below 1000 meters altitude if you want full performance without derating. Maintain humidity below 80% RH and avoid condensation on the module at all times, including during storage. Allow adequate clearance for airflow around the rack, and route AC output wiring away from low-level signal cabling to reduce induced noise.
Before commissioning, verify the supply voltage and frequency at the panel against the 115-230V AC, 50/60 Hz rating. Confirm channel assignments against your I/O schedule so that field devices match the configured outputs.
Maintenance and Reliability
Output modules are wear points in any control cabinet, so treat them as part of a scheduled inspection routine. Check terminal tightness, look for discoloration around output terminals, and confirm cabinet cooling is working. In humid environments, verify that enclosure heaters or dehumidification are functioning, since the module is rated to 80% RH without condensation. Keeping a spare on the shelf is the cheapest insurance against line stoppage — that is exactly why Oil AutoTech keeps fast-moving Schneider Electric spares ready-to-ship.
Selection Checklist
Before you order, confirm the product line is Modicon Momentum, the required output count is 16, and your field voltage falls within 115-230V AC at 50 or 60 Hz. Check that your operating environment stays within 0 to 40 degrees Celsius, 80% RH without condensation, and 1000 meters altitude without derating. If any of these points are unclear, ask for technical selection help rather than guessing.
Please verify current lifecycle status and availability with Oil AutoTech before ordering.
Frequently Asked Questions
How many outputs does the 170BDO94650 provide?
It provides 16 output channels arranged in one output group.
What voltage range does this module support?
The module operates on 115-230V AC at 50 or 60 Hz.
Can it be used above 1000 meters altitude?
The data specifies operation up to 1000 meters above sea level without derating. For higher elevations, confirm suitability with Oil AutoTech.
What are the environmental limits?
Operating temperature is 0 to 40 degrees Celsius, with maximum humidity of 80% RH without condensation in both operation and storage.
Is the module CE marked?
Yes, the 170BDO94650 is CE marked.
