What Is the 110-XCA-282-01?
The 110-XCA-282-01 is a Schneider Electric communication cable built for programming M1 systems. It belongs to the Modicon product line, a name plant engineers trust for practical, long-serving automation hardware. This cable measures 2 meters and carries a standard male/female connector pair, so it links your programming device to the M1 controller without adapters or guesswork.
If you maintain Modicon M1 equipment, you already know that the right cable is not a commodity. A mismatched lead can stall a commissioning window or leave a line down while you search for a spare. This cable solves that problem directly: it is the specified part for M1 programming tasks, rated for 24V DC operation and up to 2A of current.
Key Parameters That Matter
24V DC Operating Voltage
The 110-XCA-282-01 runs on a 24V DC nominal supply, matching the control voltage common across Modicon M1 installations. That alignment keeps your programming session stable and avoids the signal problems that appear when a cable is pushed outside its design envelope.
2A Maximum Current Rating
With a 2A current ceiling, the cable handles the demands of programming communication without overheating. For maintenance teams, this rating means the cable is not a weak link during long configuration sessions.
2-Meter Cable Length
Two meters gives you enough reach to connect a laptop or programming terminal to an M1 system while keeping the cable clear of moving machinery and walkways. It is long enough for a control cabinet, short enough to avoid tangling.
Temperature Range and Jacket
The black PVC jacket supports operation from -10°C to 60°C. That range covers most plant floor and cabinet environments, from cold storage areas to warm electrical rooms. PVC also resists the everyday abrasion that cables face during repeated connection and disconnection.
Lightweight, Practical Build
At 0.13 lbs (0.06 kg), the cable is easy to coil, store, and carry in a technician’s bag. The standard male/female connectors seat firmly and release without tools.
Where This Cable Fits
The 110-XCA-282-01 suits any workflow where an M1 system needs programming access. Commissioning engineers use it to load and verify control logic on new Modicon M1 installations. Maintenance technicians keep one in the cabinet for fast fault recovery when a controller needs a parameter reload. System integrators working across oil, gas, and industrial automation projects rely on the specified cable to avoid compatibility surprises during startup.
Because the cable is purpose-built for M1 systems, it removes the trial-and-error of generic alternatives. That matters when a production window is tight and every minute of downtime carries a cost.
Installation and Handling Notes
Connect the male and female ends to the matching ports on your M1 system and programming device. Keep the cable routed away from high-current power conductors where possible, and avoid sharp bends that stress the conductors inside the PVC jacket. Store the cable coiled and dry when not in use. Before each programming session, inspect the connectors for bent pins or debris, and check the jacket for cuts or crushing.
Compatibility Check Before You Buy
Confirm three things before ordering: your controller is an M1 system, your programming device uses the standard male/female connector type, and your installation stays within the -10°C to 60°C range. The 110-XCA-282-01 is a Modicon product line item from Schneider Electric, so it matches the systems it was designed for.
Please verify current lifecycle status and availability with Oil AutoTech before ordering. If you need help confirming the fit, the team offers hands-on technical selection support and can dispatch spares when you need them.
Why Buyers Choose This Cable
The 110-XCA-282-01 is a small part with a large role. A failed or missing programming cable can hold up an entire commissioning schedule. This cable delivers the exact specification M1 systems require, backed by Schneider Electric manufacturing and the Modicon line’s reputation. For buyers managing spares across oil, gas, and industrial automation sites, it is a practical item to keep on the shelf — fast dispatch, worldwide, when the next job calls for it.
Contact Oil AutoTech today for pricing and availability.
